eSUN 3D Printer bio Resin for LCD 3D Printers,1kg eResin-PLA- gray

Bio-based 3D Printing Resin

A general-purpose resin made from PLA monomers with unique features for LCD/LED printers.

• Material: PLA
• Wavelength (nm): 395-405
• Color: Gray
• Density (g/m^3): 1.07-1.13
• Viscosity (25C MPa s): 200-300
• Hardness (Shore D): 75-80
• Tensile Strength (MPa): 35-50
• Elongation at Break (%): 20-50
• Flexural Strength (MPa): 40-60
• Flexural Modulus (MPa): 600-800
• IZOD Impact Strength (J/m): 15-32

Top Features:

• Low odor
• Safe & environmentally friendly
• Biodegradable
• Low viscosity for improved flow

This PLA resin is specifically designed for LCD/LED light sources to enhance printing quality. It is compatible with most LCD printers using 405 nm wavelength light. With a hardness of 75 Shore D and faster printing speed, this resin offers high precision and low warp properties.

Precautions:

• Storage:
  1. Keep away from light and sealed at room temperature.
  2. Store between 15°C and 35°C in the original container.
• Usage:
  1. Shake well before use and avoid direct sunlight.
  2. Keep away from children and wear gloves for skin contact.
  3. If contacted, wash with water and seek medical advice if needed.
  4. Clean finished models with high-concentration alcohol (>95%) for 30 seconds.

Package Includes: 1 x eSUN 3D Printer bio Resin for LCD 3D Printers, 1kg eResin-PLA

Images are for illustration only; actual product may vary.