×
Beitian Dual BN-220 GPS GLONASS Antenna Module TTL Level RC Drone
This BN-220 GPS Module provides speed display and requires no driver for Raspberry Pi.
- Chipset: 8030-KT
- Receiving Format: GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS
- Frequency: GPS L1, GLONASS L1, BeiDou B1, SBAS L1, Galileo E1
- Channels: 72 Searching Channels
- Sensitivity: Tracking: -167dBm
- Reacquisition: -160dBm
- Cold start: -148dBm
- Hot start: -156dBm
- Position Horizontal Accuracy: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)
Top Features:
- Speed display capability
- No driver needed for Raspberry Pi
- 72 Searching Channels
- High sensitivity tracking at -167dBm
When the TX LED is flashing in blue, the data output is active. The PPS LED remains unlit when GPS is not fixed and flashes in red when fixed.
- Module Pin:
- 1. GND, grounded
- 2. TX, data module output
- 3. RX, data entry module
- 4. VCC, power supply module, 2.8V-6.0V
- Package Includes: 1 x Beitian Dual BN-220 GPS GLONASS Antenna Module TTL Level RC Drone
Specifications:
- Velocity: 0.1m/sec 95% (SA off)
- Timing: 1us synchronized to GPS time
- Acquisition Time: Cold start: 26s, Warm start: 25s, Hot start: 1s
- Data and Update Rate: Support Rate: 4800bps to 921600bps, Default 9600bps
- Data Level: TTL or RS-232, Default TTL level
- Data Protocol: NMEA-0183 or UBX, Default NMEA-0183
- Single GNSS: 1Hz-18Hz
- Concurrent GNSS: 1Hz-10Hz, Default 1Hz
Operational Limits:
- Altitude: 50,000m Max
- Velocity: 515m/s Max
- Acceleration: Less than 4g
Power consumption:
- VCC: DC Voltage 3.0V-5.5V, Typical: 5.0V
- Current: Capture 50mA/5.0V
- Operating temp: -40°C ~ +85°C
- Storage Temp: -40°C ~ +105°C
Connector with 1.00 mm spacing between the 4 pins patch seat. Indicator with TX LED in blue for data output and PPS LED in red for GPS status.
Wiring: GND, TX output, RX input, VCC (3.0V-5.5V)
Dimensions (mm): 22 x 20 x 6
Weight (gm): 5.3
* Images are for illustration only; actual product may vary.