2.13inch E-Ink Display HAT for Raspberry Pi
E-Ink display HAT with 212x104 resolution, ultra-low power consumption, and wide viewing angle.
- Operating Voltage (VDC): 3.3
- Display Size (inch): 2.13
- Outline dimension (mm): 65 x 30.2
- Dot Pitch: 0.229 x 0.228
- Grey level: 2
- Display Color: Red, Black, and White
- Display Resolution: 212 x 104
- Viewing Angle: >170
Features:
- No backlight for long-lasting display
- Ultra-low power consumption
- Compatible with various Raspberry Pi models
- Preserved solder pads for easy interfacing
This E-Ink display HAT for Raspberry Pi features an embedded controller and communicates via SPI interface. It supports a three-color display (red, black, and white) and has no backlight, allowing it to retain the last content even when the power is down. With ultra-low power consumption, this display only requires power for refreshing, making it energy-efficient.
It has a wide viewing angle and performs well under sunlight. The SPI interface enables easy connection with controller boards like Raspberry Pi, Arduino, and Nucleo. The package includes the display HAT, interfacing cable, and nut-bolt and spacer set. Please note that Raspberry Pi is not included in the package.
Interface:
- VCC: 3.3V/5V
- GND: Ground
- DIN: SPI MOSI pin
- CLK: SPI SCK pin
- CS: SPI chip selection, low active
- DC: Data/Command selection
- RST: External reset, low active
- BUSY: Busy status output, high active
Useful Links:
Wiki: www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)
* Images are for illustration only; actual product may vary.