INA118 General-Purpose Instrumentation Amplifier
Low-power amplifier with excellent accuracy for a wide range of applications.
- Supply Voltage: ±18 V
- Analog input voltage: ±40 V
- Output short-circuit (to ground): Continuous
- Operating temperature: -40 to 125 °C
Top Features:
- Low offset voltage: 50 µV, maximum
- Low drift: 0.5 µV/°C, maximum
- High CMR: 110 dB, minimum
- Wide supply range: ±1.35 to ±18 V
The INA118 is a low-power, general-purpose instrumentation amplifier offering excellent accuracy. The versatile, three op amp design and small size make this device an excellent choice for a wide range of applications. Current-feedback input circuitry provides wide bandwidth, even at high gain (70 kHz at G = 100). A single external resistor sets any gain from 1 to 10000. Internal input protection can withstand up to ±40 V without damage. The INA118 is laser-trimmed for low offset voltage (50 µV), drift (0.5 µV/°C), and high common-mode rejection (110 dB at G = 1000). The INA118 operates with power supplies as low as ±1.35 V, and quiescent current is only 350 µA, making this device an excellent choice for battery-operated systems. The INA118 is available in 8-pin plastic DIP and SO-8 surface-mount packages, and specified for the –40°C to +85°C temperature range. The upgraded INA818 offers a lower input stage offset voltage (35 µV, maximum), lower input bias current (0.5 nA maximum), and lower noise (8 nV/?Hz) at the same quiescent current. See the Device Comparison Table for a selection of precision instrumentation amplifiers from Texas Instruments.
Related Document: INA118 IC Datasheet
Images are for illustration only; actual product may vary.