×
FlexiForce A502 Ultra Thin Force Sensor
Square standard sensor with 2-pin male connector and force range of 0-222 N (0-50 lb)
- Force Range: 0-222N (0-22.6 Kg)
- Length: 81.3 mm
- Width: 55.9 mm
- Thickness: 0.203 mm
- Sensing Area: 50.8 mm
- Surface Layer: Polyester
- Connector: 2-pin Male Square Pin
- Drift: < 5% per logarithmic time scale
- Hysteresis: < 4.5% of full scale
- Linearity (Error): < 3% of full scale
- Max Current (A): 0.2
- Operating Temperature Range (C): -40 to 60
- Operating Voltage (VDC): 0.25 ~ 1.25
- Pin Spacing (mm): 2.54
- Repeatability: < 2.5%
- Response Time (S): 5
- RoHS Compliant: Yes
Top Features:
- Square standard sensor
- 2-pin male connector
- Force range of 0-222 N (0-50 lb)
- Linear model through 0-22N (0-5 lb)
The FlexiForce A502 Ultra Thin Force Sensor is ideal for various applications including Testing and Measurement Equipment, Embedded Electronics, OEM Development Kit, Consumer Electronics, and Multimeter.
How to Adjust the Force Range: In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1k min.). To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.
Typical Performance:
- Linearity (Error): < 3% of Full Scale (Line drawn from 0 to 50% load)
- Repeatability: < 2.5% (Conditioned Sensor, 80% of Full Force Applied)
- Hysteresis: < 4.5% of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
- Drift: < 5% / logarithmic time (Constant Load of 111 N (25 lb))
- Response Time: < 5 sec (Time required for the sensor to respond to an input force; Impact load recorded on Oscilloscope)
- Operating Temperature: -40C 60C (-40F 140F)
Package Includes: 1 x FlexiForce A502 Ultra Thin Force Sensor
* Images are for illustration only; actual product may vary.