×
FlexiForce A301/1 Force Sensor
Optimized for high volume manufacturing and ideal for embedding into products.
- Force Range: 0-111N (0-11 Kg)
- Length: 25.4 mm
- Width: 14 mm
- Thickness: 0.203 mm
- Connector: 2-pin Male Square Pin
- Pin Spacing: 2.54 mm
- Operating Voltage: 0.25 - 1.25 VDC
- Sensing Area: 9.53 mm
- Surface Layer: Polyester
- Max Current: 0.2 A
- Drift: < 5% per logarithmic time scale
- Hysteresis: < 4.5% of full scale
- Linearity (Error): < 3% of full scale
- Repeatability: < 2.5%
- Response Time (S): 5
- Operating Temperature Range (C): -40 to 60
- RoHS Compliant: Yes
Top Features:
- Optimized for high volume manufacturing
- Ideal for embedding into products
- Adjustable force range
- Compact size
The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Applications: Testing and Measurement Equipment, Embedded Electronics, OEM Development Kit, Consumer Electronics, Multimeter
How to Adjust the Force Range: In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1kmin.) To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.
Typical Performance:
- Linearity (Error): < 3% of Full Scale (Line drawn from 0 to 50% load)
- Repeatability: < 2.5% (Conditioned Sensor, 80% of Full Force Applied)
- Hysteresis: < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
- Drift: < 5% / logarithmic time (Constant Load of 25 lb (111 N))
- Response Time: < 5 sec (Time required for the sensor to respond to an input force; Impact load recorded on Oscilloscope)
- Operating Temperature: -40C - 60C (-40F - 140F)
Package Includes: 1 x FlexiForce A301/1 Force Sensor
*Images are for illustration only; actual product may vary.