FlexiForce A101 Force Sensor
Small sensor optimized for high volume manufacturing, ideal for embedding into products.
- Force Range: 0-44N (0-4.5 Kg)
- Length: 15.6 mm
- Width: 7.6 mm
- Thickness: 0.203 mm
- Connector: 2-pin Male Square Pin
- Sensing Area: 3.8 mm
- Pin Spacing: 2.54 mm
- Surface Layer: Polyester
- Operating Voltage: 0.25 - 1.25 VDC
- Max Current: 0.2 A
- Drift: < 5% per logarithmic time scale
- Hysteresis: < 4.5% of full scale
- Linearity (Error): < 3% of full scale
- Operating Temperature Range: -40 to 60°C
- Repeatability: < 2.5%
- Response Time: 5 S
- RoHS Compliant: Yes
Top Features:
- Optimized for high volume manufacturing
- Ideal for embedding into products
- Can measure up to 10 lbs
- Dynamic range can be modified by changing drive voltage
The A101 is our smallest sensor optimized for high volume manufacturing and ideal for embedding into products. The 2-pin sensors are currently our smallest standard sensor. The sensors can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.
Applications: Testing and Measurement Equipment, Embedded Electronics, OEM Development Kit, Consumer Electronics, Multimeter
How to Adjust the Force Range: In order to measure higher forces, apply a lower drive voltage (-0.5 V, -0.25 V, etc.) and reduce the resistance of the feedback resistor (1k min.) To measure lower forces, apply a higher drive voltage and increase the resistance of the feedback resistor.
Typical Performance:
- Linearity (Error): < 3% of Full Scale (Line drawn from 0 to 50% load)
- Repeatability: < 2.5% (Conditioned Sensor, 80% of Full Force Applied)
- Hysteresis: < 4.5 % of Full Scale (Conditioned Sensor, 80% of Full Force Applied)
- Drift: < 5% / logarithmic time (Constant Load of 25 lb (111 N))
- Response Time: < 5 sec (Time required for the sensor to respond to an input force; Impact load recorded on Oscilloscope)
- Operating Temperature: -40°C to 60°C (-40°F to 140°F) ** Force reading change per degree of temperature change = 0.36%/C (0.2%/F)
Package Includes: 1 x FlexiForce A101 Force Sensor
*Images are for illustration only; actual product may vary.