eSUN ePLA-Matte 1.75mm 3D Printing Filament 1kg- Milky White
A cost-effective, environmentally friendly PLA filament with high rigidity and easy printing
- Density: 1.174 g/cm3
- Heat Distortion Temp: 51°C at 0.45MPa
- Melt Flow Index: 2.1190/2.16kg
- Tensile Strength: 34.56 MPa
- Elongation at Break: 56.1%
- Flexural Strength: 41.21 MPa
- Flexural Modulus: 1119.41 MPa
- IZOD Impact Strength: 33.15 kJ/
- Durability: 4/10
- Printability: 9/10
- Extruder Temperature: 190-230°C
- Recommended temperature: 215°C
- Bed temperature: 45-60°C
- Fan Speed: 100%
- Printing Speed: 40-100mm/s
- Heated Bed: Optional
- Recommended Build Surfaces: Glass, PEI, BuildTak, Kapton
Features:
- Environmentally friendly
- Cost-effective
- High-speed printing
- Easy to peel off the support
ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. It has high rigidity and does not require an enclosure. With low shrinkage, no warping or cracking, it is suitable for large-size model printing. The support is easy to peel from the surface, leaving a smooth and flat contact surface. There is no irritating odor during printing, making it safe and environmentally friendly.
The spool is made by reusing injection moldings of PETG, ABS, PLA production waste, and other industrial waste, while the outer box is made of recyclable paper. The matte surface is delicate and does not show layer lines, providing an excellent printability experience. The filament is not easily breakable, contributing to a smooth printing experience. It can be used for early concept models and rapid prototyping. With low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA products for printing models.
Note: ePLA-Matte lines are softer than other lines, so the extruder's tightness adjustment should not be too tight to avoid affecting printing.
*Images are for illustration only; actual product may vary.