×
DIP 3 Color LED Module
A versatile LED module for creating various colors through PWM signal adjustment.
- Operating Voltage (VDC): 5
- LED Type and Size: RGB 5 mm
- LED drive mode: Common Cathode Driver
- PCB Width: 1.5mm
- Length (mm): 20
- Width (mm): 15
- Height (mm): 15
- Weight (gm): 5
Features:
- Plug-in full-color LED
- RGB trichromatic limiting resistor to prevent burnout
- Variety of single-chip interface
- Three primary colors can be mixed through PWM adjustment
This module consists of a 5mm RGB LED and three 150 limiting resistors to prevent burnout. Adjusting the PWM signal on each color pin will result in different colors. This is a DIP 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors. Connect the red pin (R) on the KY-016 to pin 11 on the Arduino. Blue (B) to pin 10, green (G) to pin 9, and ground (-) to GND. Notice that you do not need to use limiting resistors since they are already included on the board.
Pin Connection with Arduino:
- LED module Arduino
- R Pin 11
- B Pin 10
- G Pin 9
- - GND
Package Includes: 1 x DIP 3 Color LED Module.
* Images are for illustration only; actual product may vary.