LC 5A 12V Overcurrent Protection AC Current Detection Sensor Module
Relay over-current signal output with adjustable settings
- Operating voltage: DC12V
- Operating current: <20MA
- Operating frequency range: 20Hz ~ 400Hz
- Output mode: Switch signal output
- Maximum detection wire diameter: 5.2mm
- Mounting hole: hole diameter is 3mm, hole distance 52.5mm
- Operating environment: -40°C ~ +85°C
- The current detection range: AC0.3A-5A
- Dimensions (LxWxH)mm: 38 * 44 x 12
- Weight: 22g
Top Features:
- Adjustable over-current signal setting
- Relay pull/release mechanism
- Easy to control external circuits
- Compact and lightweight design
The LC 5A 12V Overcurrent Protection AC Current Detection Sensor Module utilizes a current transformer to collect the AC signal for relay over-current signal output within the range of 0-5A. The relay pulls during over-current situations and releases when the current is within the safe range. Users can control external circuits using the COM, NC, and NO ports to achieve over-current protection.
By adjusting the potentiometer, users can set the overcurrent protection point. Clockwise adjustment reduces the detection current. To use, connect VCC and GND to a DC12V power supply, adjust the potentiometer until the relay pulls, indicating over-current activation. Reduce or cut off the current flow to identify the over-current protection point.
If the relay releases when the current flow is reduced or cut off, the over-current protection point has been identified. If the relay remains engaged, continue adjusting the potentiometer to find the correct point.
* Images are for illustration only; actual product may vary.