NEW 10A RC TX Controlled Relay Switch PWM Receiver LED Control Spray Switch
A versatile relay switch with safe-protection feature and LED control
- Load Current Max: 10A
- Input Voltage (V): 5-28V
- RX lead length: 100mm
- Power lead length: 100mm
- Cable Size (AWG): 20
Top Features:
- Reads pulse width from 400 to 2600us
- Safe-protection function for unexpected activation prevention
- LED indication for normal and safe-protection modes
- Requires 5V supply for proper functioning
The module can read a pulse width ranging from 400 to 2600us. If the pulse width is more than 1800us, the MOSFET switch will close; if less than 1200us, the switch will open.
This module includes a safe-protection feature to reduce unexpected activations. The safe-protection mode will activate under two conditions:
- If the pulse is more than 1800us at first power-up, the MOSFET switch will open. The LED will blink, requiring the input to be moved to the off position for normal mode activation.
- If the signal is continuously bad for 500ms, the MOSFET switch will open, and the LED will blink. The device will deactivate safe-protection mode once the signal is good.
LED behavior in normal mode: The LED will be on when the input pulse is greater than 1800us and off when less than 1200us. In safe-protection mode, the LED will fast blink.
When using the electronic switch, ensure a 5V supply to the receiver. Operating at a voltage greater than 5V may lead to improper functioning. Additionally, the remote control channel needs more than 3 channels for compatibility.
* Images are for illustration only; actual product may vary.